We make a pen for rabbits

Pin
Send
Share
Send
Send


It may seem to many rabbit breeders that a corral for rabbits is an absolutely useless thing. They say that animals live in cages, they have good conditions and so on. However, those who have a small walking space, note that with him the animals are more well-fed, healthy and active. What should be a walking "yard", as well as how to do it yourself, let's talk now.

Features Rabbit Pens

Corral for rabbits is not exactly a cage, but also not an aviary. This point should be clearly marked in order to properly understand its purpose. In the pens do not contain animals, but only let out to walk in warm, dry weather. For example, if you have a spacious grassy lawn or a small area in the garden, you can easily arrange your eared pets weekend. To do this, it is enough to make your own hands the general construction or buy a ready-made pen.

Corral is a small mesh design designed for walking or temporary placement of animals. It has no bottom and implies only low lateral barriers and a covering from above.

The simplest corral can be in the form of an ordinary portable mesh rectangle, which is installed near the house on the site. To make it with your own hands, it is enough to make supports and pull the grid on them. As a rule, the size of a convenient pasture is customized individually, based on the number and breed of animals. On average, it is customary to allocate a height such that rabbits can freely stand on their hind legs. It is desirable to slightly drift the side obstacles into the ground, since the eared like to dig holes and can make holes.

From the top of the corral must cover. Best of all the same galvanized mesh as the walls, but you can take the usual soft mesh. This will prevent animals from escaping and protect them from predators. As practice shows, the stay of the rabbits in the pens has a positive effect on their health. Kids are especially well-developed in such conditions, so if the place and the backyard territory allows, do not ignore this possibility.

Do it yourself

So, anyone can make a small pen with their own hands. We present to your attention a small instruction on how to make a portable mesh design. Do not forget that the size of the pen depends on the number of animals, based on 1 square. meters per 1 individual. The more space there is, the more grass will be available to the animals, which means that the fence will have to be relocated less often. Optionally, on the site with your own hands, you can make a shed canopy or put a house in the form of a booth.

Tools and materials

  • 7-10 meters of welded mesh with a cell of approximately 5x5 cm;
  • soft mesh for the roof, slate;
  • wire pliers;
  • wooden or steel slats;
  • other tools as needed.

Instruction

  1. So, first of all, we need to make a framework with our own hands, placing wooden or steel rails around the perimeter. Can take hollow tubes.
  2. We stretch the mesh onto the frame, firmly fixing it with wire.
  3. We calculate the size of the pen so that 30 cm of its lower edge can be deepened into the ground. We make the general height not less than 1 meter.
  4. If you do not deepen the grid with your own hands, then make a bottom from the same grid. Otherwise, your animals can quickly be in the garden.
  5. If desired, part of the roof can be made in the form of a shed overhang.
  6. That's all ready. It remains only to make their own hands, set the pen on the grass and let their eared pets go there.

Photo Gallery

Photo 1. Sample pen with their own hands Photo 2. Purchased construction of the grid Photo 3. White pet is resting on the walking area

Pin
Send
Share
Send
Send


Загрузка...

Загрузка...

Popular Categories