Economical livestock breeders prefer to do drinking bowls for rabbits with their own hands. This solution allows you to significantly reduce the cost of arranging cages for animals with valuable fur and very tasty meat. But self-made water tanks must meet certain requirements and standards. The article will talk about the types of devices, features and advantages of each of them. And also we will consider how to make a convenient and functional design for drinking without special expenses.
There is a mistaken opinion that it is not necessary to install drinkers for rabbits, since these animals do not like water. And they get the necessary amount of moisture from succulent fodder. This is fundamentally wrong - an adult individual drinks about 600-1000 ml of liquid per day.
The water in the drinking bowl must be fresh and clean, otherwise the eared ear, by nature, simply will not drink it. A liquid for the rabbit is vital - without it a normal digestive process is impossible.
Drinkers for rabbits must meet the following requirements:
- be comfortable to use;
- have sufficient volume (at least, to accommodate half of the daily volume of water);
- rabbits should simply have access to water;
- safety - a drinking bowl for rabbits with or without heating should not have sharp edges or carry other threats to the health of the pet;
- have a good attachment, securely fixing its position.
Drinkers, self-made or purchased, should be protected from debris, dust and animal excrement. Rabbits simply won't drink dirty water.
Next, let's talk about what are the types of poilnikov, as well as how to make a drinking bowl for rabbits with his own hands.
Avtopoilki for rabbits in most cases are used on large and medium-sized livestock farms. The principle of operation of such a device is simple. There is a large tank of water from which liquid is fed to poleniki installed in aviaries.
The system of water level control in drinking bowls is based on the use of floats. As soon as the beacon drops below the set level, liquid is supplied.
Avtopoilka for rabbits has a significant advantage - it is possible to simultaneously apply water to all cells, regardless of their number. Plus, rabbits are always provided with fresh water in the right amount, which is especially important during the summer season.
It is quite possible to make an auto-drinker for rabbits with your own hands, but this idea will be worth the time and money.
About cups and plastic bottles
In the household, it is much more often to use cup rabbits for rabbits. In fact, as a reservoir installed in a cage, any container of a suitable size and volume can act.
It is the availability of this type of drinking pot that is its main advantage. The disadvantages include the fact that the rabbit can easily overturn the tank or clog the water with hay or waste products.
If the use of automatic drinkers for rabbits ensures that eared ear round the clock provided with water, then the state of the water in the bowl must be constantly monitored. In addition, watering rabbits in winter is complicated by the fact that the water in the tank freezes even with a slight frost.
When keeping rabbits, drip drinkers are also used; they are sometimes also called semi-automatic or vacuum. Such a structure consists of a removable water tank and a popper directly.
Most often, the drip drinker is made of a plastic bottle, which acts as a storage tank. The bottle is placed neck on the container from which eared can drink. As required, water flows by gravity.
The advantage of drinking bottles for rabbits from plastic bottles is the simplicity of their manufacture and use. Among the disadvantages are the possibility of accidentally tipping the storage tank and the constant clogging of the drinking tank.
The most modern version of drinkers used on large rabbit farms is nipple or nipple. A small tank is attached to the cage, equipped with a special papilla, touching which tongue the animal can drink water. This design has many advantages:
- the ability to add mineral dressings and vitamins to water without fear that the concentrated liquid will be poured;
- rational use of water;
- eared fish can always drink fresh and clean water;
- transparent tank allows you to easily monitor the level of the fluid and to carry out topping up.
Nipple reacts to all touches, so even a little rabbit can easily drink some water from such a pot.
Only such drinkers for rabbits cannot be used in winter - the nipple can freeze, and the structure will lose its function.
Buying designs is justified only when the production volumes of rabbit rearing. But each owner is quite able to design it with his own hands. You can read the exact instructions in the article "How to make a nipple drinker for rabbits."
Next, let's talk about how to water the rabbits in the winter.
Heating will help in winter
Winter watering rabbits requires special attention. Especially in the case of street animals, regardless of the season. Minimal knowledge of physics is enough to understand that the freezing of liquids in drinking bowls at a negative temperature cannot be avoided if you do not use heating.
The intensity of heating depends on the climatic characteristics of the region. Growing rabbits in the winter outside in areas where the air temperature does not fall below -10 C, you can simply warm the tanks with improvised means - sawdust, hay, straw or foam.
Of course, the water will have to be changed more often than usual, but such a winter drinking bowl for rabbits is the most affordable and most budgetary option.
Drinking bowls with heating for rabbits in specialized stores are presented in a wide range. Consider their main varieties.
The first ones are drinking bowls for rabbits with heated lamps. Dignity - the minimum power consumption, lack of - need constant monitoring.
The second - poilniki with built-in thermostat. The heating process starts automatically when the fluid temperature drops below the set rate. These devices are the easiest and most convenient to use.
Less often, to ensure the drinking of rabbits in the winter, special warm coasters are used, on which containers with water are installed. Such platforms, working similarly to the "warm floor" system, are recommended to be installed to rabbit with offspring, since they help to maintain normal air temperature in the cage. In other cases, they are not particularly effective, since we are talking about the consumption of large amounts of electricity.
Use of snow and ice
In the event that it is not possible to equip the cells with special devices with heating, water will be given to rabbits according to a schedule - 2-4 times a day. After some time, the tanks are emptied to avoid the formation of ice. It is better that the liquid was slightly warm + 22 + 24 degrees, and it must be poured 15-20 minutes before feeding.
Some breeders replace snow in winter. This is not quite the right decision, because rabbits are prone to colds. However, if there is no alternative, then snow can be given. The main thing that he was clean.
Another winter option is ice. It is prepared as follows. Several crystals of potassium permanganate dissolve in slightly salted water, after which the solution is poured into forms and sent to the freezer.
For convenience, a wire loop is embedded in each shape, for which ice is then suspended in a cage.
Loop option allows you to avoid the soiling of ice feed and waste products.
Do it yourself
It's time to talk about how to make drinking bowls for rabbits with your own hands.
The first option that we will consider is a vacuum pressure cup. For its manufacture is useful plastic bottle, wire or plastic fasteners and a bowl or container, from which the big-ears will drink water.
The principle of manufacturing is extremely simple. The bottle is attached to the cage wall at such a height that the distance between its neck and the bottom of the bowl is literally 2-3 mm. You can pre-cut the bottom of the bottle, replacing it with a lid of a suitable size. Then, in order to fill the water in the trough, you do not have to remove fasteners every time.
It is possible to install a heating lamp under the bowl, thereby making a winter drinking bowl for rabbits.
But before you make a drinking bowl for a rabbit with your hands with nipples, you must first buy the nipples themselves. They are freely available in all pet stores, so with the purchase just will not have problems. In general, to construct this drinker, you will need a plastic bottle or flask and the nipple itself. The tank is filled with water, the cork is changed to the nipple and the design is attached to the wall of the cage at a height convenient for rabbits.
The easiest way to make a cup drinkers. In their quality, you can use cut plastic bottles, cans, bowls and the like. The main condition - the container should not have chipping and sharp edges.
Like if the article helped you decide on the choice of drinking bowls for rabbits.
Share in comments what type of drinker is most convenient for you.