Braid for rabbits

Comfort and safety during the walk will be ensured by a properly selected rabbit harness. In the warm season, eared pets need fresh air and green grass. Because of the fearful nature of the animal can be hurt, run away and get lost. Therefore, it is important to prevent such consequences in advance. The design itself and the leash should be comfortable and limit movement to a minimum. On the other hand - allow you to carefully monitor the pet.

Which harness is better

Rabbit shleyka for walking - a necessary attribute of a full walk, which helps to maintain the health and immunity of animals. The design needs durable. Also, rabbit leads are characterized by reliable clasps. In this case, the appropriate models correspond to the body size of a particular rabbit.

Shleyka in the form of T-shirts - the best option for eared animals. Even under stressful situations, animals will not tighten it tightly around their neck, they will not be freed from human control, and they will not run as far as they can see.

An important advantage of this device is the ability to pull up the animal by the strap, if necessary, to quickly pick it up. These "clothes" are easy to wear with minimal skills. To do this, gently fasten it on the stomach, and then on the neck.

How to wear

Between the collar and the neck should pass the index finger. Optional nylon strap provides a snug fit in the chest and abdomen. From the back there is a special carbine, to which the leash is fastened.

The rope construction consists of nylon straps, which on the side appear on the body of animals as the letter “H”. When choosing this model, it is important to choose the right size. In no case should such a “dress” be tightly wrapped around the body. Ideally, the belts should only fit against it. It is equally important that they can be easily fastened.

Putting a rope harness on the rabbit, you want to start from the neck, skip the second strap under the abdomen, fasten it. After that, from the back, attach a belt controlling rabbit movements.

Teach your pet to outfit

It is recommended to train the eared pet to the leash and harness as early as possible. This must be done slowly. The procedure itself can take from four days to one week.

Initially, it is better to wear a harness in familiar home conditions, giving the rabbit the opportunity to be in it for only a few minutes. Every day the amount of time increases. When the eared mouse stops responding to it, you can fasten the leash, but do not use it yet.

Let the leash reach behind the moving rabbit on the floor or the ground. Over the course of several days, the training time should also be gradually increased. Only after the animal gets used to such ammunition can it be carefully taken out of the room onto the street. At first it is better not to move away from the animal, especially not to pull the leash with effort.

You can choose a quiet safe place covered with tall grass, drive a small peg and allow the animal to enjoy nature. It is better not to lose him from sight. Wearing the harness must be carefully and gently so as not to cause fear, anxiety, pain or discomfort in the animal.

This procedure should be associated with it, followed by a pleasant pastime, so walking the rabbit is recommended in quiet, clear weather. For a greater sense of freedom, you can use the leash roulette design.

How and where is better to walk the rabbit

For walks home eared pet is required to be taken seriously. Rabbit is very timid. It does not tolerate a long road, drafts, direct sunlight, rain, snow.

Before you start attaching the animal to walks in the fresh air, you should follow these rules:

  • it is undesirable to bring too small animals up to the age of four months for a walk;
  • pet should be vaccinated;
  • green grass should be included in the rabbit's diet at the time of walking;
  • It is important to choose the most successful time and a safe, quiet place for walking with dry grass without dew;
  • care must be taken while walking;
  • to the place of walking it is better to carry the animal on your hands or inside a special carrying.

Due to the extreme sensitivity of the domestic rabbit, he can panic and be frightened for the most insignificant reason. Sometimes in such situations, an incorrectly fastened rabbit leash becomes a deadly noose.

On the other hand, the stressful condition, the feverish flight of an eared pet often leads to fractures, injuries to internal organs. Thus, on a walk, this pet needs care, increased attention.

Tools and materials for the manufacture of shleyki

For the full content of the harness for the rabbit is of great importance. This is especially true for apartment buildings. The range of leads of the right size and quality in most zoological shops leaves much to be desired. Therefore, for many owners of decorative animals it is relevant to make such walking accessories with their own hands.

To do this, you need tools such as scissors, awl, sewing machine, centimeter. In addition, the materials needed are yarn, yarn, braid, soft fabric, several small rings.

It is important to choose soft “friendly” materials for rabbit skin. For example, flannel or drape. It is not recommended to focus on the rope structure, since it is not very reliable.

Step by step sewing instructions

Before sewing work it is necessary to carefully measure the parameters of the body eared pet. The circumference of the waist, chest and neck, the distance from the neck to the waist are the main measurements necessary for sewing high-quality rabbit harness.

First, you need to cut off two strips of tape to accurately fit the waist and chest of the animal. To calculate the length of the first, you need to get the sum of the girth of the chest and waist, add to it 20 cm on the seams.

The second strip should correspond to a length of 10 cm more than the distance between the neck and the rabbit's chest. Then the first strip should be sheathed from the inside with a special lining fabric.

At the next stage, you should make a double loop on one of the sides, inside which you must pass the ring. Measure the distance in the bend area and fix it. To do this, on the place of a break you need to make a second seam, attaching a buckle to it.

Last stages

On the other side of the braid you need to make an oblique incision. At a distance of about 1 cm from the cut end pierce a few holes with an awl. Then the ends and the inner side sheathe a soft lining.

At the last stage, you need to put together all the components of the structure, fix the leash on the ring with a carabiner. A shleyka, carefully made in accordance with the instructions, will add a lot of positive moments to the walk for the eared pet and its owner.

And you know, what is the best and safest way to walk a rabbit? If this article has caused interest, answered important questions on the optimal design of the harness, then please put the likes.

Share interesting information via the Internet. Leave your comments.

Popular Categories